Exclusive Deal Gripset 11y For Home [MOXF4y5G]
Use Gripset 11Y for: Enhancing adhesion, durability, and water resistance of cement screeds, renders, patch mortars, primers, adhesives, and grouts in submerged, underground, and exposed environments.
Gripset 11Y: A Technical Overview
Gripset 11Y is a concentrated SBR latex polymer admixture engineered to upgrade the performance of cement-based systems in demanding Australian site conditions. By modifying cement chemistry, it increases adhesion to a wide range of substrates, reduces permeability, and improves flexural strength, making it ideal for waterproofing, structural repair, and high-bond primer applications. Its low water/cement ratio and ability to resist aggressive environments — including freeze/thaw cycles, de-icing salts, and efflorescence — ensure long-term performance in submerged, subterranean, and exposed projects. Whether used in renders, screeds, patch mortars, or as an adhesive/grout enhancer, Gripset 11Y delivers reliable, consistent results that meet professional expectations.
Core Features & Specifications
- Improved adhesion strength to cementitious and mixed substrates for longer-lasting repairs and overlays.
- Reduces water/cement ratio for denser, more durable compounds.
- Increases flexural strength and reduces shrinkage to minimise cracking risk.
- Enhances water resistance, making cement-based systems suitable for immersion and high-moisture areas.
- Excellent resistance to freeze/thaw cycles, de-icing salts, and aggressive environmental conditions.
- Improves abrasion resistance for heavy-duty flooring and trafficable surfaces.
- Reduces permeability to gases and liquids, increasing durability in corrosive environments.
- Compatible with a wide range of substrates including concrete, masonry, asphalt, and Gripset membranes.
The Gripset 11Y Advantage
- Boosts job-site reliability by ensuring consistent bonding across varied surface conditions.
- Delivers system compatibility for primers, screeds, renders, and waterproofing membranes.
- Supports compliance with Australian Standards for cement-based construction systems.
- Reduces call-backs by enhancing resistance to efflorescence and environmental degradation.
- Versatile mix ratios allow tailored performance for primers, mortars, screeds, and adhesives.
- Backed by Gripset’s technical support and proven in Australian climate extremes.
Proactive Troubleshooting
Scenario: Applying over contaminated surfaces
Potential Outcome: Weak adhesion leading to delamination or system failure.
Adheseal Best Practice: Mechanically remove contaminants by grinding or abrasive blasting, and ensure the surface is clean, dry, and sound before priming.
Scenario: Priming onto active moisture or rising damp
Potential Outcome: Blistering, loss of bond, or membrane failure.
Adheseal Best Practice: Treat substrates with Gripset E60 prior to application, ensuring moisture sources are eliminated.
Applications in Practice: Trade Scenarios
For Waterproofers (Specifier/Engineer): High-Bond Priming in Immersed Areas
The Professional's Challenge
Ensuring primer adhesion to porous concrete in submerged tanks or pools where water pressure and chemical exposure can compromise the system.
The Adheseal Solution: Engineered Certainty in Practice
Use Gripset 11Y slurry primer (1:1:1 ratio with sharp sand and cement) applied at 1.0mm thickness to provide a dense, water-resistant bond layer before membrane installation.
Best Practice Note
Dampen highly porous substrates before priming to prevent premature suction and ensure even film formation.
For Builders (Business Owner/Operator): Durable Screeds in Wet Areas
The Professional's Challenge
Maintaining screed integrity in bathrooms, balconies, and external walkways prone to moisture ingress and cracking.
The Adheseal Solution: Engineered Certainty in Practice
Mix Gripset 11Y and water at 1:3 ratio as the mixing liquid for a 1:4 cement/sand screed, ensuring reduced shrinkage, improved flexural strength, and resistance to efflorescence.
Best Practice Note
Prime with Gripset 11Y slurry immediately before placing screed using a wet-on-wet technique for maximum bond strength.
For Tilers (On-Site Applicator/Installer): Enhancing Adhesives and Grouts
The Professional's Challenge
Preventing adhesive or grout deterioration in harsh conditions such as swimming pools or exposed facades.
The Adheseal Solution: Engineered Certainty in Practice
Incorporate Gripset 11Y into the mix water at a 1:3 ratio to improve bond, reduce permeability, and enhance long-term durability against moisture and thermal cycling.
Best Practice Note
Ensure consistent mixing and avoid over-watering to maintain the polymer/cement ratio critical for performance.
Exclusive Deal Gripset 11y For Home [MOXF4y5G]