One-of-a-kind Silcor 580 - Us Warehouse [5CUaczbW]
- Free & Fast Shipping
- 1-Year Warranty
- 30-Day Easy Returns
One-of-a-kind Silcor 580 - Us Warehouse [5CUaczbW]
Use Silcor 580 for: Heavy-duty trafficable decks, podiums, green roofs, and internal wet areas that demand Class III flexibility.
Silcor 580 is a premium two-part, elastomeric polyurethane membrane built for projects where failure isn't an option. Designed for heavy-duty applications like car parks, podiums, and plant rooms, it delivers a tough, resilient barrier that handles structural movement without splitting. With a 1:1 mix ratio by weight, it cures fast—even in low humidity—so you can get on with the job.
This membrane is rated Class III for high extensibility, meaning it stretches over 700% to bridge cracks and accommodate thermal expansion. It’s low odour and low VOC (under 35g/L), making it safe for occupied sites. Whether you're sealing a balcony or a high-traffic deck, Silcor 580 gives you predictable performance and a seamless finish that protects your reputation and your margins.
Class III Certified (AS 4654.1 & AS 4858)Compliance you can trust for external and internal wet areas—no callbacks, just signed-off works.
>700% Elongation at BreakPotential Outcome: The product fails to cure properly, remaining tacky or weak, leading to complete removal and rework.
Adheseal Best Practice: Always weigh components 1:1 by weight, never by volume. Mix the Polyol first, then combine. Correct ratio guarantees the cure.
Potential Outcome: Moisture trapped in concrete causes blistering and delamination as it tries to escape.
Adheseal Best Practice: Ensure concrete moisture is <5%. If between 5.0% and 6.9%, you must prime with Epocote F100W. Test first, prime right, and avoid blisters.
Large external decks are high-risk zones. You need a membrane that can handle thermal movement, resist rain quickly, and pass strict AS 4654.2 compliance inspections.
The Adheseal SolutionSilcor 580's Class III rating ensures it flexes with the structure. Apply a minimum 1.5mm DFT for non-traffic areas. For heavy traffic, build it up to 3.0mm DFT and top coat with Silcor Top Coat 80. It becomes rain resistant in roughly 3 hours, protecting your schedule.
Best Practice NoteAlways install 15mm bond breaker fillets using Silcor LM PU Sealant at wall/floor junctions. Success means a watertight handover with zero leakage liability.
Plant rooms face vibration, heavy equipment loads, and potential chemical spills. Standard acrylic membranes often fail under these mechanical stresses.
The Adheseal SolutionSilcor 580 cures to a tough Shore A 80 hardness. When combined with a wear coat (sand broadcast) and Silcor Top Coat 80, it creates an impact-resistant, non-slip floor that withstands maintenance traffic and machinery vibration.
Best Practice NoteTerminate the membrane into drainage outlets correctly. Ensure the substrate has a 1:100 fall. A correctly laid floor protects the structure below from costly water damage.
One-of-a-kind Silcor 580 - Us Warehouse [5CUaczbW]